Drywall Services
We provide all of our drywall services to both, Residential and Commercial properties!
J&D Construction is your trusted partner for Level 5 drywall and custom drywall projects. We specialize in delivering exceptional quality and precision in every job.
Our expertise includes:
- Drywall Installation: We have the knowledge and experience to hang, tape, and texture drywall in any configuration necessary.
- Level 5 Drywall: Our team is highly skilled in achieving the highest level of finish for your drywall surfaces.
- Custom Drywall Work: Need something unique? We can create custom drywall features tailored to your specific requirements.
- In addition to installation and repair, we offer drywall demolition and removal.
We use only the highest quality materials and industry-leading techniques to ensure every job is completed to your satisfaction.
On-Site Management for Your Peace of Mind
When you choose J&D Construction, you'll always have a dedicated drywall technician on-site to address your questions and concerns. We believe in providing personalized service and ensuring your complete satisfaction throughout the project.
Our Services Include:
- New construction
- Remodels
- Residential properties
- Commercial properties
- Basements
- Ceilings
- Acoustic ceilings
- Barrel vault ceilings
- Domed ceilings
- Fog-coated ceilings
- Knockdown ceilings
- Orange peel ceilings
- Smooth ceilings
- Sprayed ceilings
- Curved walls & soffits
- Custom / detail work
- Arches
- Archway corners
- Bullnose corners
- Columns, pillars
- Fast arch
- Fog-coated walls
- Hand texturing
- Knockdown walls
- Mold resistant drywall
- Niches & custom recessed areas
- Orange peel walls
- Skim-coating
- Specialty veneer plastering
- Spray Textures
- Sport Courts
- Venetian & veneer plastering
- Window returns
- Repairs of all sizes
- Resurfacing/retexturing
- Sanding
- Water damage repair
- Drywall demolition
- Drywall removal service
Levels of Drywall Finishes
Level 0
No taping, finishing, or accessories required.
Usage: Temporary construction or when final decoration is undetermined.
Level 1
All joints and interior angles shall have tape set in joint compound. Surface shall be free of excess joint compound. Tool marks and ridges are acceptable.
Usage: Above false ceilings or other areas that are out of public view where a degree of fire and noise resistance is required.
Level 2
All joints and interior angles shall have tape embedded in joint compound and wiped with a joint knife leaving a thin coating of joint compound over all joints and interior angles. Fastener heads and accessories shall be covered with a coat of joint compound. Surface shall be free of excess joint compound. Tool marks and ridges are acceptable. Joint compound applied over the body of the tape at the time of tape embedment shall be considered a separate coat of joint compound and shall satisfy the conditions of this level.
Usage: As a substrate for tile walls and ceilings as well as in garages, warehouses, and other places where appearance is not a primary concern.
Level 3
All joints and interior angles shall have tape embedded in joint compound and one additional coat of joint compound applied over all joints and interior angles. Fastener heads and accessories shall be covered with two separate coats of joint compound. All joint compound shall be smooth and free of tool marks and ridges. It is recommended that the prepared surface be coated with a drywall primer prior to the application of final finishes.
Usage: Suitable base for heavy-medium textured paint or other thick finishes.
Level 4
All joints and interior angles shall have tape embedded in joint compound and two separate coats of joint compound applied over all flat joints and one separate coat of joint compound applied over interior angles. Fastener heads and accessories shall be covered with three separate coats of joint compound. All joint compound shall be smooth and free of tool marks and ridges. It is recommended that the prepared surface be coated with a drywall primer prior to the application of final finishes.
Usage: “Standard” household and office walls. Used with light or non-textured finishes. Not suitable for harsh lighting conditions, which may highlight minor imperfections.
Level 5
All joints and interior angles shall have tape embedded in joint compound and two separate coats of joint compound applied over all flat joints and one separate coat of joint compound applied over interior angles. Fastener heads and accessories shall be covered with three separate coats of joint compound. A thin skim coat of joint compound, or a material manufactured especially for this purpose, shall be applied to the entire surface. The surface shall be smooth and free of tool marks and ridges. It is recommended that the prepared surface be coated with a drywall primer prior to the application of finish paint. The skim coat is a final leveling agent suitable to smooth out a surface to be used under the harshest lighting conditions that may otherwise highlight any imperfections under the finished surface.
Usage: Gloss and entirely non-textured surfaces.